| | |
|
Squeezer Tweezers
A new tool for the discerning fly tyer. A pair of tweezers that you squeeze to open a pair of long jaws and when you relax the jaws close firmly hoding whatever has been inserted. The ridged jaws close over a length of 2 inches. The uses are only limited by your imagination! Ideal for picking up individual beads or other small items of for holding material and adjusting it before insertion into a dubbing loop. The tool is made from strong sprung stainless steel, is robust and will become an essantial part of tying kit. The tweezers received a very positive review in the February 2007 issue of Fly-Fishing and Fly-Tying magazine.
Price: £5.60 (€8.01)
|
|
|
Flat Blade Pliers
A simple sprung plier that can be used for bebarbing barbed hooks or squashing fly bodies to give them the desired profile.
Price: £4.60 (€6.58)
|
|
|
|
|
|
Whip Finish Tool
A general purpose whip finish tool based on the same principles as the Matarelli finisher. The most convenient, simple to use and effective tool for the purpose and the only whip finisher recommended by FlyTek.
Price: £3.80 (€5.43)
|
|
|
Dubbing Needle
A strong needle in a brass holder with a hole in the end of the handle. A most convenient tool for making half hitches and the needle for picking out dubbing, putting varnish on the head or generally picking at any part of the fly.
Price: £1.50 (€2.15)
|
|
|
|
|
|
Brass Hair Stacker
A strong, solid hair stacker that has a hexagonal outer case to stop it rolling when it is placed on the tying bench. The stacker is 4cm. high, has an internal dimension of 1cm. diameter and will work with a range of hair types and sizes.
Price: £6.00 (€8.58)
|
|
|
Wooden Hair Stacker
A 2 piece hair stacker made from finely machined hardwood that is a pleasure to use, light weight and will cope with the range of furs that most tyers are likely to use.
Price: £5.00 (€7.15)
|
|
|
|
|
|
Dubbing Spinner
A small weighted clip that is used for spinning dubbing loops. The use of dubbing loops is increasing in popularity with the application of lightly dubbed bodies and thoraxes on a range of nymphs and flies.
Price: £5.00 (€7.15)
|
|
|
Hackle Guard
A useful tool for protecting hackles when flies are finished - to ensure that no hackle fibres are trqapped during the final/whip finish operation. Each guard has 5 stations of differing diameter to cover the range of fly sizes encounted in normal tying.
Price: £2.30 (€3.29)
|
|
|
|
|
|
Material Spring
A spring for placing around the stem or neck of vices to hold ribbing, thread etc. during the tying process.
Price: £1.40 (€2.00)
|
|
|
Griffin Dubbing Brush
A small twisted brush of fine metal fibres (about 2mm - 3mm long) mounted in a comfortable hexagonal handle. Used gently it is much more effective than a dubbing needle for picking out fibres and will give a more even controlled finish than using velcro. Highly recommended.
Price: £7.50 (€10.73)
|
|
|
|
|
|
C & F Nail Knot Pipe
A really useful combination tool for making nail knots (to join the leader to the fly line with minimum bulk) and including a splicing needle for those wishing to thread the leader through the fly line. The needle is also very useful for removing wind (actually sacting) knots from the leader and tippet. One end of the tool is magnetised for picking up/holding flies. A small tool that is useful to carry when fishing .
Price: £11.00 (€15.73)
|
|
|
Stonefly Rotary Drier
An essential tool when making epoxy bodied flies. Stick the flies into the sponge disc that slowly rotates ensuring that the epoxy stays where you want it to and does not sag or distort whilst setting. The tool comes with a chuck and holder to enable rods to be held - for use when rewhipping or vanishing rods. High density foam holds all flies securely from the smallest to the largest. Sturdy base prevents rota drier from falling over. Comming soon rod turning chuck to fit rota drier takes the trouble out of turning your finished rod while the flex coat dries on ring wraps. Mains operated
Price: £28.00 (€40.04)
|
|
|
